Located 6 min North of Barrie

on Hwy 11 North between the

6th and 7th Line in Oro Station

Premium Plus Pump: 3.5 GPM [12.5 LPM]

SHURflo’s Solar Products consist of pumps and accessories ideally suited for operation on solar power. Low amp draw, consistent performance, and long life make our solar pumps perfect for use on the range, in the solar home, or wherever highly efficient DC powered fluid delivery is needed. These pages offer useful product data for configuring your solar pumping system. SHURflo has a network of knowledgeable solar product distributors ready to help you find the right SHURflo products for your solar project.

The solution to your remote water pumping needs. This pump is rugged, durable and built to last. The 9300 delivers a steady 112 GPH (422 LPH) at its maximum depth of 230 feet (70M) when supplied with 24 VDC. Its unique water-tight power connector stops water wicking and prevents potential condensation problems. Great for livestock watering, irrigation, pond areation, remote homes and cabins.

Note: Do not use any SHURflo pump for petrol gasoline, petroleum products, solvents, thinners or any other flammable liquid with a flash point below 82 C (180 F). Not for use where flammable vapors are present.

Features:

• Long -life 24 VDC operation
• For 4" wells or larger
• Quick disconnect with "Watertite-Gland" Design Pat Pend
• Corrosion-proof housing with stainless-steel fasteners
• Runs dry without damage
• 50 mesh stainless steel inlet screen
• State of the art solid diaphragm

Standard Demand Pump
3.5 GPM open flow, Santoprene^® valves, Santoprene^® diaphragm, 45 PSI Demand Switch, 1/2" MSPT ports, Poly Housing

Model # 2088-443-144

Standard Demand Pump
3.0 GPM open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT ports, Poly Housing

Model # 2088-474-144

Premium Pump w/ Splash-Proof ShurCoted Motor
3.6 GPM open flow, Santoprene^® valves Santoprene^® diaphragm, 45 PSI Demand Switch, 1/2" MSPT ports, Poly Housing

Model # 2088-414-534

Premium Pump w/Fin Cooled Motor
3.6 open flow, Santoprene^® valves, Santoprene^® diaphragm, 45 PSI Demand Switch, 1/2" MSPT ports. Poly Housing

Model # 2088-514-145

.

Premium Pump w/Sealed Motor
3.6 GPM open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT* ports, Poly Housing

Model # 2088-574-534

Standard Demand Pump
3.3 GPM open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT* ports, Poly Housing

Model # 2088-594-154

The solar slow pump uses solar electric, battery, or AC power to provide 200 to 2600 gallons per day from shallow water sources. The Slow pump can push water as high as 450 vertical feet. It is an ideal pump for lifting water from ponds, streams, storage tanks and shallow wells. This is a very efficient pump, and can run on as little as a single 35 watt solar panel for short lifts. Even at it's maximum (450 foot lift), it can easily run on two 120 watt panels.

    The slowpump is not submersible, but can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers, and streams. It can push the water as high as 450 vertical feet and through miles of pipeline. Slow pumping minimizes the size and cost of the solar array, wire, and piping. The Slowpump is less expensive than the submersible diaphragm pumps, easier to repair, and made in a wider range of sizes. 

.

1-866-765-3936

Please call for specifications